how to choose hotel bedding fabric？

how to choose hotel bedding fabric？

As people’s living standards improve, they are becoming more picky about hotel bedding. Therefore, the grade of linen fabrics in hotels is getting higher and higher. The following high-end hotel linen experts—Hangzhou trans Cosy textile will show you relevant knowledge about linen fabrics:

At present,

the mainstream four-star and five-star fabrics are generally 60×40/173×124, 60×60/173×156, 60×80/200×183, 80×80/200×183, and the above fabrics can be collectively referred to It is called “high-end and high-density”, and the latter density can generally be expressed by the total density in the warp and weft direction (the sum of the warp and weft density), for example: 60×40/173×124, which can be said to be: 60×40/ 297T, generally called 300T, 60×60/173×156 can be said to be: 60×40/329T, generally called 330T.

But according to our experience,

it is wrong for high-star hotels to blindly pursue high-count and high-density. After all, duvet covers, sheets and pillowcases are vulnerable and must be replaced gradually over a period of time. Therefore, we recommend that high-star hotels purchase hotel linen At the same time, we must also consider the practicality and capital situation, and blindly pursue the grade without considering the service life is also one-sided. For example, 60×80 fabrics and 80×80 fabrics are not much different in feel and appearance, but in terms of fastness, 60×80 fabrics are significantly higher than 80×80 fabrics, and the price is 60×80 The fabric is also slightly higher than the 80×80 fabric, you should consider the points when choosing.

In order to strengthen the washing durability of hotel linen,

Hangzhou trans cosy textile has increased the quality of linen during production. After testing, the number of washes that will not break under normal washing conditions are: cotton bed linen, pillowcase, 300-350 times; polyester cotton bed linen ( 20% polyester, 80% cotton) 350~400 times; towels, 300~400 times.

Requirements for four- and five-star room linen (excerpts)

in the “Quality and Equipment Requirements for Star-rated Hotel Guest Rooms LB/T 003-1996” formulated by the National Tourism Administration in 1996:
One or two stars: the yarn count is not less than 20s, the warp and weft density is not less than 6060, and the length and width should be greater than the cushion 600mm. b)
Three-star: yarn count above 20s, warp and weft density not less than 6060, length and width should be greater than 700mm of the cushion. c)
Four or five-star: the yarn count is not less than 32s, the warp and weft density is not less than 6080, and the length and width should be greater than 700mm of the cushion.
[Note: 20s=29tex, 32s=18tex. 6060=236/236,6080=236/. ]

There is no high requirement for the yarn count of the five-star linen, as long as it is not less than 32 yarns.
All in all, the more high-count and high-density fabrics, the softer and finer the hand feel, the luster of the cloth surface, highlighting the grade, but the price is high, the number of washing cycles is not high, and the 60×60 fabric is more cost-effective.